They are Tadao Ando type of concrete plates. The four bolt holes are the signatures of this kind of concrete materials.

The surface is rather rough and dirt can be found on the superficial.

It is a disastrously damaged concrete wall exposing thoroughly rusted reinforcing steels.

Areas around rusty concrete steels are also contaminated by rust.

The concrete surface is very bumpy and full of pits.

It is a perfect black asphalt with no cracks and damaged areas.

Rolled asphalt is commonly used to surface roads. This composite material is also used for paving parking lots.

This concrete texture has cracks, pitting, flakes and scratches on the surface.

This texture is suitable for walls and pavements.

It is an asphalt texture with cracks all over the surface. Definitely, it is a marvelous material for ground or flooring. It is also great for texturing a wall.

It is a very rough concrete with a lot of tiny pits or pores.

White spots can be found on the surface.

Besides, big cracks are everywhere.

It is an uneven grey plaster wall with prominent trowel marks.

Dirt can be found on the surface.

It is a green plaster wall. It has a little glossiness. Definitely, it is not a new wall, but a worn out wall.

Some of the shiny green paint was peeled off exposing the base wall material.

After applying this texture to a wall, it looks like a thick plaster wall. The grey color gives it a raw appearance.

It is a worn out material with some cracks running across the whole texture. There are a lot of trowel marks leaving on the texture.

This concrete has a bit shiny texture. A few big cracks are running on the concrete. Greenish mold also grows on the surface.

It looks natural when being used as concrete wall or floor texture of damaged buildings and roads.

It is a very common grey asphalt.

This texture fits for highways, car roads, pedestrian roads, pavements etc.

It also right for concrete walls and pillars.