It is a metallic manhole cover having rust, dust and even cement on the surface. The plate is rather bumpy and studs are worn and damaged.

There are 4 presets in the SBSAR file to allow users quickly create a rusty, dirty, full of cement or clean manhole cover.

The SBSAR also gives users the flexibility to change the shape of cover, amount of studs, edge wear level, damage level, rust level, dirt level, texts on the cover, position of labels etc.

It is cooked rice which is the best material for creating Japanese sushi and various kinds of asian dishes.

The rice shape can be fine tuned by the SBSAR file.

Remember to apply subsurface scattering. Otherwise, the rice will become plastic pellets.

The wetness appearance can be changed by the roughness.

It is the water surface of a frozen lake or pond. The thin ice is shattered into pieces leaving numerous cracks. Frost and broken ice can also be found on the material.

The SBSAR file allows users to adjust the amount of cracks, frost etc.

It is a stylized version of water waves having shiny creases. The material is good for texturing lakes, swimming pools and ponds.

The color, the number and width of shiny edges can be tuned in the SBSAR file.

It is a type of Japanese paper called Shoji which is translucent and is used as windows of doors and dividers. Japanese also uses them to make lanterns.

The color and number of fibres can be changed by the SBSAR file.

It is a traditional Japanese screen, door or divider. Of course, it can be used as a lantern. The paper window are its most prominent characteristic. The Shoji paper is translucent, so the mask is provided for users to pass light through if needed.

The SBSAR file allows users to set numbers of columns and rows of the frame, the width of the frame, deformation level, edge wear, the number and intensity of scratches and so on.

A pair of iron wires are twisted to create coins and barbs. Brownish rust also forms along the wire.

Using the SBSAR file, users can tweak the tightness, number of coils, coil size, metal color, rust color, rust level, dirt level etc.

This barbed wire texture can be used together with Chain-link Iron Wire Fence Texture Woven in Diamond Shape
(Metal 0017) material.

It is a primitive wood plank. Large and small grains, dents and color variance can be found on this raw material.

The color and amount of grains and dents can be changed by the SBSAR file.

It is a tree truck texture. Tree barks and mosses can also be found. It is sort of stylized material.

The SBSAR file allows users to change the colors of the wood and mosses. The quantity of mosses can also be adjusted.

It is a yellowish suede leather which is commonly used to make gloves, shoes, purses and some furniture.

The SBSAR file provides the flexibility to change the leather colour and patchy pattern of the suede.

It is a texture of chesterfields. The skin is highly worn with a lot of scratches, cracks and cuts. Some damaged areas even expose the yellow sponge-like filling of the sofa.

With the SBSAR file, the amount of cushions, the bulge level of cushions, the number of cuts and colors etc. can be changed.

It is a good wicker material for texturing rattan type furniture. Grains and darken color variance can be found on the surface.

The width of rattan threads, the gap between threads and color variation level can be tuned by the SBSAR file.

It is a cobblestone ground which is covered by a lot of rounded stones. Fallen leaves having different colors are scattered over the whole pavement. Besides, cracks and dirt also exist on the rocks.

The SBSAR file gives users the flexibility to change the cobblestone amount, grout width, amount of leaves, amount of cracks and dirt level.

It is a leaf vein texture comprised of thicker main veins and thinner side veins.

The SBSAR allows users to control the amount, thickness of the veins, contrast between main and side veins etc.

They are old wood planks which have a lot of wear, cracks and scratches. Wood grains can also be seen.

The plank amount, grout width, wood color etc. can be changed by the SBSAR file.

It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.

It is a polished metal texture with numerous barely seen horizontal lines. Scratches and dents can be found on surface.

The SBSAR allows users to adjust the amount of scratches and dents. The metal type can also be chosen.

It is a quill pen and also a white bird feather.

The SBSAR allows the colours of the feather to be changed. The curvature can also be adjusted.

It is important to apply subsurface scattering in the shader. Otherwise, the feather will look like a hard material rather than soft and fluffy texture.

It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.

Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.

It is fine brown fur of animals such as horses, bears, squirrels etc.

The SBSAR grants users the right to adjust the fur colour, curl level and so on.