From its yellowish color, it tells us it is a sandy rock. Usually, this type of rocky materials can be found on cliff.

Cliff rocks are extremely bumpy. The rocks seem to be divided into bands. It also looks like a stack of rocky layers. This characteristic defines the appearance of cliff rocks.

Due to wind and water weathering, a lot of horizontal stripes appear on the surface. To be precise, the rocks were etched by wind and water flow many decades ago.

It is a red tufted leather which is ultimately for sofas and chairs. The red buttons make depressions at intervals by pushing the leather in. This creates the characteristic of tufted sofas.

Since it is a leather, scratches is almost unavoidable. Besides, dirt and pits appear on the material surface too.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

It is a large piece of cedar wood which has a very light yellowish color. There are quite a lot of barks on its surface.

The texture pattern has different colors of tree barks ranging from yellow to brown. Surely, barks have darker colors.

Since it is a natural wood, the surface is not very reflective.

It looks like a piece of wenge wood which is a kind of hard timbers, but its glossy and ultra smooth surface tells us it is in fact a lacquered veneer.

The deep red wine color is its signature color.

Similar to " Teak Wood Veneer or Lacquered Veneer Texture (Wood 0012)", it is a superior material for furniture such as cupboards.

From the wood bark pattern and the extremely smooth surface, it is definitely a lacquered veneer.

It shows the wood pattern of a teak tree which has deep brown colors.

Lacquered veneer is largely used as covers of wooden furniture.

It is a ground near seashore. This seashore is entirely covered by yellowish sand.

Due to uneven surface, sea water is trapped in some holes creating water puddles in this sandy land.

Water and wind marks can also be found on the beach.

It is plainly a red brick wall, but the bricks are covered by a layer of grey cement.

Parts of the cement is worn and exposes the underneath red bricks.

Damage can be found on both the concrete layer and bricks.

It is a sound proof material called acoustic foam. Usually, it is used to cover walls of music or live studio. It is also used in laboratory in which scientists do different sound-related experiments.

Black is the most common color for acoustic foam.

It is the most commonly used bubble wrap for packaging goods and products. Each bubble has different degrees of damage and wrinkles.

Opacity map is also provided with the texture because bubble wrap is semi-transparent.

In order to achieve good rendering result, glass shader should also be used.

Metal map can also imitate the excellent result by mixing the opacity and metallic maps for some shaders, so a metallic map is also available, but optional.

It is an artificial leather having the most prominent scale patterns of alligator or crocodile skin.

Scars and wrinkles can be found on each single scale of the skin. Occasionally, pores appear on some scales.

Each scale also curves slightly inward.

As most of leather, the material is dyed into brown.

This texture is a very primitive and raw concrete wall. It is a plain wall with nothing on the surface but dirt and worn marks.

There are different types of worn. Some are vertical while some are irregular. Some damage creates holes and gaps. Some aged parts pop up creating scar-like marks.

It is a perfect material for walls and floors.

It is a primitive jade stone. Various green marble patterns can be found on the surface.

Yellowish spots also appear since this texture is a raw rocky material.

It is not a perfect green jade. There is subtle amount of yellow tint mixes with the precious green parts.

It is a skin texture of a watermelon. Dark green cracks are running vertically along the light green background.

By close inspection, there are millions of tiny crackles in lighter green areas.

Bumpy parts can also be found on the material.

Clearly, they are typical black and white marble tiles in a checker layout. White cracks are running across black tiles while black crackles are spreading over white checkers.

They are commonly used for paving indoor floors.

It is a cork board assembled by pressing small wood strips and chips into a solid slab.

Wooden cork boards can be found in many office. People like pinning memo notes on it. Therefore, it is a good companion of Wrinkled Memo Paper Texture (Paper 0002).

Some walls and floors are made of cork board too, so it is a fantastic material for these kinds of partitions.

They are chinaware tiles with Chinese patterns on the top. The porcelain tiles are highly worn and have a few big cracks.

The China tiles are mainly green and yellow with a traditional Chinese symbol.

Of course, a lot of dirt is found on the surface.

This material is suitable for china artworks such as vases. It is also a good texture for walls.

This iron sheet has a lot of holes as it is a punched or perforated metal sheet. Its surface tells us it is oxidized and a lot of reddish and yellowish rust has formed on the surface.

It is a desired material for machine cases.

It is a highly reflective black and white marble plate.

The white cracks have different width and the black cloudy background creates an illusion of depth.

It is a perfect material for texturing walls and floors in 3D architectural visualization (archviz).