These hexagonal tiles are terracotta having the raw grey colour.

There are a lot of parameters can be changed in the Substance SBSAR file, including the tile colour, tile height, edge smoothness, edge wear, grout colour, grout width, grout overflow, dent colour, dent amount, dent depth, scratch amount, damage level etc.

They are ceramic tiles in triangle shape.

The tile colour, grout colour, tile height, surface roughness, paint overflow amount, edge wear, edge fading effect, amount of dents and scratches etc. can be be controlled by the Substance SBSAR file.

They are rough terracotta tiles having yellowish and sandy colours. Damages, dents and scratches can be found on these hexagonal pavers.

The tile colour, surface roughness, tile height, edge smoothness, edge wear level, grout colour, grout width, amount of dents, amount of scratches, damage level etc. can be managed through the Substance SBSAR file.

These are hexagonal terracotta tiles having reddish shades of colours. They are old pavers having a lot of scratches, dents and pores.

The colour of the tiles, colour variation, surface roughness, level of edge wear, grout colour, grout width, amount of dents, scratches, and dirt etc. can all be controlled by the Substance SBSAR file.

It is a ground paver made of concrete. Grass grows in grout.

The amount and aspect ratio of tiles, grout colour, grout width, surface roughness, dent depth, pebble height etc. can be set via the Substance SBSAR file.

They are soundproof tiles. These acoustic panels are mainly made of plastic foam.

The colours of tiles and offset random can be adjusted by using the Substance SBSAR file.

These are ceramic tiles arranged in a geometric rhombus style. Each set of three creates a virtual cube.

With the SBSAR file, the tile colour, tile position random, grout colour, cement height, edge wear etc. can be set.

This bricks are arranged in an uneven manner. Its use is more aesthetic more than structural. Therefore, this texture is commonly used for garden or sitting room decoration.

The offset, offset random, bevel, height variation, edge wear level, intensity of bump, intensity of trowel marks and wear highlight can be set by the Substance SBSAR file.

They are rather long stone bricks which are usually used for wall cladding as a decoration.

The offset, offset random, bevel, tile height variation, edge wear level, bump intensity, trowel mark intensity, wear highlight etc. can be controlled via the Substance SBSAR file.

They are ceramic tiles having hexagonal shape. This texture is extraordinary suitable as a kitchen tile.

The color of the tiles and grout, level of color variation, surface bump, position random, range of overflow paint, level of edge wear, amount of dents and scratches can be set by the Adobe Substance SBSAR file.

These square lime tiles have an interesting geometric pattern.

The 2 colors of the tiles, color of the grout, level of surface bump, and level of dirt can be controlled with the SBSAR file.

It is a variant of the typical black and white checker tiles. Its brownish shade of colors offers it more nostalgic style.

The color combination, grout color, position random, grout width, edge wear level, amount of dents and scratches can all be managed through the Substance Designer SBSAR file.

These square black tiles are ceramic material having a semi-reflective surface.

The color combination, grout color, position random, grout width, edge wear level, amount of dents and scratches can all be changed by the Substance 3D SBSAR file.

These square tiles are ceramic material. They are most suitable for the classic black and white floor.

The color combination, grout color, position random, grout width, edge wear level, amount of dents and scratches can all be changed by the Substance 3D SBSAR file.

These greenish blue tiles are ceramic material which is widely used in kitchen design. The tiles are arranged vertically.

The colors of the tiles and grout, level of color variation, surface roughness, position random, overflow of paint, edge wear, dents and scratches can completely controlled by the SBSAR file.

These elongated diamond shaped tiles are of ceramic type that has a shiny surface.

The color of the tiles and grout, level of color variation, range of overflowing paint, amount of dents and scratches, edge wear level, edge color fade etc. can all be controlled through the Substance 3D SBSAR file.

They are ceramic tiles having a shape of fish scale.

The color of the tiles and grout, level of color variation, intensity of edge color fade, level of edge wear, amount of dents and scratches etc. can be managed by the Substance SBSAR file.

They are playground mats providing a protective flooring for children. Green and red are common colors used. This mulch are durable as outdoor tiles.

The SBSAR file lets you change the colors of the checkers and define the offset random.

These protective tiles can easily be found in playgrounds. They are used as safety surfacing. Black and red checker pattern is one of the popular combinations.

The Substance 3D designer file gives you the freedom to change the colors of the tiles and set the offset random of the tiles.

This egg crate shaped foam is acoustic panels which is commonly installed in studio rooms.

The SBSAR gives you the freedom to set the orientation of panels, the amount of hemispheres, colors of the tiles etc.