Concrete Blocks with Excessive Mortar
They are concrete blocks and its grout is filled with excessive mortar. There are horizontal marks on the bricks.

Using the SBSAR file, users can change the colors of the blocks and cement, control the amount of mortar, and adjust other imperfection parameters.
 
Concrete Tiles with Horizontally Cut Bands
They are concrete blocks and each block is cut into 3 bands. There are different colors of chips on the surface.

The SBSAR file allows users to change the number of bands / strips, tile offset, tile color, position random, rotation random, edge wear level, grout width, grout color, chip size, chip colors etc.
Gravel Tiles
It is a tile full of gravel. This texture is suitable for both floor and wall.

By the SBSAR file, users can change the offset, position random, rotation random, edge wear level, grout width, dirt color, dirt amount etc.
 
Concrete Block Tile with Hole
They are concrete blocks which have a rectangular holes in the middle.

Using the SBSAR file, users can change the colors of tiles and grout, edge wear level, dent amount, crack amount, dirt level etc.
Worn Brick Wall Texture
It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.
Damaged Concrete Plates
It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.
Brick Wall of Medieval Forts
It is a brick wall texture which can be used for texturing medieval forts. Of course, it is suitable for modern architecture. There are smaller pebbles between large bricks.
Red Brick Wall Partially Plastered
It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.
Worn Red Bricks in England
It is a typical red bricks wall which can be found everywhere in England. Due to weathering, some bricks are worn and dirt is everywhere.

The bricks are arranged in running bond layout. Some bricks have a much lighter colors than others. There are also a lot of color variation between bricks.
Angled Red Brick Wall Texture
It is a red brick wall but bricks are organized in a weird angle, so brick corners are facing out.

Each brick has different degrees of damage. Pits,trowels and dirt is found everywhere.
Red Brick Wall Texture Covered by Cement
It is plainly a red brick wall, but the bricks are covered by a layer of grey cement.

Parts of the cement is worn and exposes the underneath red bricks.

Damage can be found on both the concrete layer and bricks.
White Brick Texture for Wall Decoration
They are not real bricks, but decorative bricks for walls. They have extraordinary bumpy surface.

Dirt can be found on the surface.

They are used for wall decoration in bedrooms and kitchens.
Shiny Red Brick Texture for Wall Decoration
They are very shiny red bricks which are mainly used for decorating walls of kitchen, bathroom or washroom.

Due to the highly reflective surface, numerous finger prints are left on the tiles.

Dirt also accumulates around grouts.
Irregular Brick Texture with Various Colors
These bricks are organized in an very irregular pattern. Though it looks chaotic, they are roughly arranged row after row.

The weary bricks have different colors such as pink, yellow, orange, grey and brown.

Some are rectangular while some are square. Some are large and some are small.

This material is very suitable for walls.
Red Brick Texture Partially Covered by Cement
These red bricks are arranged in running bond layout and they are partially covered by excessive cement came from grouts.

They have various red and orange colors. Some of them are white and have the colors of concrete.

The edges are worn and there are also pitting on bricks and grouts(gaps).
Traditional Red or Orange Brick Texture in Basket Weave Layout
They are very typical red construction bricks. Though they are called as red bricks, their colors tend to be orange.

Their surface is very rough and full of pits or tiny holes. Edges are also ragged. There are also some damages on the exterior.

The brick layout of these bricks are quite different from classical one. They are arranged in a pattern called basket weave.
Extra Long Rectangle Brick Texture in Running Bone Layout
Comparing to normal red bricks, these grey bricks are much longer. Unexceptionally, the bricks are arranged in running bone layout pattern.

Edge wear, edge dirt, trowel marks and lump areas are on the surface too!
PBR Red Brick Texture with Trowel Marks
They are classical red bricks widely used in many European countries including United Kingdom, Netherlands etc.

If you inspect the bricks carefully, you will find trowel marks on it. Of course, pits, scratches, worn and damaged areas also exist.
Mossy Gray Brick Texture
Those gray bricks have a lot of mosses on the surface. If they are enlarged, lichens can also be found.

This texture is rather bumpy and coarse.

It can act as both a wall material and a floor material.
Broken Red Brick Texture with Cracks
They are typical red bricks. Some bricks are broken while some have cracks. They have rough surface.

Cement is found on some bricks too.
1
2
3