It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.
Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.
Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.
The base is an asphalt road which is covered with bitumen of various colours.
Due to weathering, cracks can be found on the surface. The SBSAR file allows the amount and depth of the cracks to be adjusted.
Due to weathering, cracks can be found on the surface. The SBSAR file allows the amount and depth of the cracks to be adjusted.
It is the base concrete texture. It is primitive and raw having large and small pores on the surface.
It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.
It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.
It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.
With the sbsar file, the grout intensity and damage level can be adjusted.
With the sbsar file, the grout intensity and damage level can be adjusted.
It is a simply rock texture, but can be applied to a large varieties of natural environment. It is simple, but useful.
It can be used to texture a single stone or as a rocky ground of cliff.
It can be used to texture a single stone or as a rocky ground of cliff.
It is a spider web. Some people may call it cobweb. Technically they are different, but most people use these 2 terms interchangeably.
With the sbsar file, you can control the damage level and number of silk lines. Besides, the deformation can also be controlled.
With the sbsar file, you can control the damage level and number of silk lines. Besides, the deformation can also be controlled.
It is a concrete wall with some plaster, but has numerous dents of various sizes due to bumps, hits or shots.
It is a fabric for sweater or jumper. Some imperfection of knitted clothes can be found. If you increase the tile, this woven pattern can be used for any clothing.
This texture is an imperfection. It is glass stain. When a glass of cold drink is put on a cloth, it will leave a water stain.
There are 6 variations which should be enough for scattering randomness.
There are 6 variations which should be enough for scattering randomness.
It is a tree bark texture. From its horizontal patterns and the peeling, we can tell it is a birch tree.
They are punch through holes. The normal map can be used for creating punch through effect of papers, card boards or creating bullet shots.
These holes go inwards. This texture can also be used together with "Imperfection and Decal of Bullet Holes (Imperfection 0003)" which goes outwards.
These holes go inwards. This texture can also be used together with "Imperfection and Decal of Bullet Holes (Imperfection 0003)" which goes outwards.
They are bullets holes. The most useful maps of this texture are normal and mask. With the normal map, you can shoot holes in any materials especially metal. The mask tells you the position of the holes.
It is good to be treated as an imperfection or decal.
These holes go outwards. This texture can also be used together with "Decal of Punch Through Holes (Imperfection 0004)" which goes inwards.
It is good to be treated as an imperfection or decal.
These holes go outwards. This texture can also be used together with "Decal of Punch Through Holes (Imperfection 0004)" which goes inwards.
It is a fingerprint texture which can be used to create imperfection on smooth surfaces, especially reflective materials.
It is a galvanized roll up door. The door can be rolled up into a cylinder and kept at the top of the shop.
Therefore, hinges exist between blades. Galvanized metal sheet has its particular pattern which can be found on the texture.
Therefore, hinges exist between blades. Galvanized metal sheet has its particular pattern which can be found on the texture.
From the grid pattern, we know that they are waffle slabs made of reinforced concrete. They grid pattern allows concrete ribs running in 2 directions perpendicular to each other on its underside.
As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.
As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.
It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.
Despite its name columns, this texture suits extremely well for walls and urns.
Despite its name columns, this texture suits extremely well for walls and urns.
It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.
If you are going to 3D model a concrete wall, please do not miss this texture!
If you are going to 3D model a concrete wall, please do not miss this texture!
It is a classical corrugated metal sheet where is commonly used to build walls of factories or construction sites.
Dirt and edge wear can be found on this texture.
Dirt and edge wear can be found on this texture.
This is a stucco plaster. By examining the surface, a lot of fan shape trowel strokes or marks can be found.
This is an oxidized iron sheet on which there is numerous scratches and dents. Most of the scratches and pits corroded and are covered with rust. Besides, some of the rust is dripping down due to the rain wash.