This is a highly oxidized iron sheet with stacks of rust formed on its surface. It is almost fully covered with oxidized substance. The rust has different colors including yellow, orange, red and brown.

The base metallic plate is more shiny than rusty materials. In fact, rust is not a reflective material.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

They are Tadao Ando type of concrete plate. Concrete 0008 is horizontally arranged while this texture is vertically organized.

Besides, these concrete plates has 8 holes while Concrete 0008 has only 4 holes.

Dirt can easily be seen on the surface.

They are Tadao Ando type of concrete plates. The four bolt holes are the signatures of this kind of concrete materials.

The surface is rather rough and dirt can be found on the superficial.

This paving tiles are usually used with its companion tiles Tiles 0009.

These tiles have a pattern of 3 bands while its complementary tiles Tiles 0009 have a pattern of dots.

They are made of PVC / plastic.

Dirt can be found on the top and around the pop up stripes.

It is a oxidized brushed aluminum plate with dirt. The oxidation reduces the reflectiveness of the metal, so the surface has uneven glossiness.

Besides oxidation, dirt also affects the colors and reflectivity of aluminum.

It is a tremendously rusted metal plate. Thick layers of rust cover the whole iron surface, but the rust is thinner around round cap nails.

The rust has different colors including light brown, dark brown, orange and black.

Scratches can also be found on the rusty superficial.

This highly oxidized metal plate is full of round cap nails, but well aligned. It is usually used as covers for containers.

Dirt has accumulated around round caps as those are good places to hide debris.

Oxidation has different degrees too. It can be proved by different reflectivity.

Of course, scratches cannot be omitted for oxidized iron metals.

It is a galvanized metal sheet with different sizes of scratches and pitting.

The crystallized pattern defines the signature of galvanized iron.

Galvanized metal is commonly used for covering wooden structure. Usually, construction workers simply nail them on wooden parts.

It is also used to make water tanks.

It is a cobalt or nickel like metal plate. The surface has been hammered, so it is very uneven and bumpy. The surface is also oxidized affecting the reflection.

This texture composes of multiple corrugated sheets of metal stacking on each other. The wavy shape of corrugated metals makes it stands out among other metals.

If you look at it carefully, you will find there are rusty cuts and scratches.

They are typical tactile pavement tiles which you can find on almost every street in modern cities. Each tactile tile has bumped up flat dots. Each dot or circle has tiny crosses on the top to increase the fiction of the ground.

This paving tiles are usually used with its companion tiles Tiles 0011.

These tiles have a pattern of dots while its complementary tiles Tiles 0011 have a pattern of 3 bands.

Have you ever noticed what the metallic texture of a train is ? This texture can be found on doors of underground trains. When your face is pushed to a train door during rush hours, you will discover the surface of train doors are covered with well aligned tiny crosses.

It is a plain metal plate having uneven surface. It is highly oxidized. It is not as reflective as new metal, but it still has a little glossiness.

As usual, highly oxidized iron comes with rust.

This metal pattern exists in many places, e.g. floors of elevators. It is the most typical 5-strip pattern for increasing fiction.

It is not just a metal plate, but also a rusty texture. Dirt is also on the surface.

It is a plain iron metal. The surface tells it is highly oxidized leaving only a few shiny areas.

Besides, the surface is covered with rust and dirt.

It is a rusty metal plate with typical cross patterns cover the whole surface. The bumpy cross pattern is used to increase the fiction and grip of metal especially when it is being used for flooring.

Dirt can also be found on the texture.