They are tiles having rough surface which is commonly used in toilet to create a anti-slip floor. Each tile has a pattern similar to marble.

Using the SBSAR file, users can change the amount and aspect ratio of tiles, color and width of grout, edge wear, amount of dents etc.

It is a metallic manhole cover having rust, dust and even cement on the surface. The plate is rather bumpy and studs are worn and damaged.

There are 4 presets in the SBSAR file to allow users quickly create a rusty, dirty, full of cement or clean manhole cover.

The SBSAR also gives users the flexibility to change the shape of cover, amount of studs, edge wear level, damage level, rust level, dirt level, texts on the cover, position of labels etc.

It is a cobblestone ground which is covered by a lot of rounded stones. Fallen leaves having different colors are scattered over the whole pavement. Besides, cracks and dirt also exist on the rocks.

The SBSAR file gives users the flexibility to change the cobblestone amount, grout width, amount of leaves, amount of cracks and dirt level.

It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.

They are old and worn roof tiles. Since the tiles are on the rooftop, it is full of lichen and bird poop.

With the SBSAR file, the amount of tiles, lichen, bird poop, dirty level, damage level can be manipulated.

It is the base concrete texture. It is primitive and raw having large and small pores on the surface.

It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.

It is a cactus. The texture maps contain a combined version of the cactus body and its spines, and separated layers of the body and spines.

The combined version let you texture a cactus quickly while the separated version let you adjust the spines and make them more pop put.

With the sbsar file, you can adjust the damage level of the cactus, number of columns of spines etc.

It is a red sandstone or mudstone texture. Sandstone is a sedimentary rock composed mainly of tiny silicate grains.

This rock can increase the varieties of stone species in the natural environment of CG scene.

It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.

It is a simply rock texture, but can be applied to a large varieties of natural environment. It is simple, but useful.

It can be used to texture a single stone or as a rocky ground of cliff.

It is a concrete wall with some plaster, but has numerous dents of various sizes due to bumps, hits or shots.

From the grid pattern, we know that they are waffle slabs made of reinforced concrete. They grid pattern allows concrete ribs running in 2 directions perpendicular to each other on its underside.

As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.

It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.

Despite its name columns, this texture suits extremely well for walls and urns.

It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.

If you are going to 3D model a concrete wall, please do not miss this texture!

This is an oxidized iron sheet on which there is numerous scratches and dents. Most of the scratches and pits corroded and are covered with rust. Besides, some of the rust is dripping down due to the rain wash.

It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.

This is a rubber mulch mat that can easily be found is many playground for safety. It is a material having a lot of pores, but it can absorb vibration that makes it a good substance for protecting children in playing field.

If you want to texture a playground, please don't miss this PBR texture.

This is skin of strawberry having a lot of yellow bits called achenes. In fact, achenes are fruits having a seed inside.

In reality, it is not easy to have a flat sheet of strawberry skin. Therefore, this texture can help if you want to create a computer graphics strawberry.

These are classic old tiles with star-shaped patterns printed. The tiles become yellowish due to aging. The edges of tiles are worn to reveal its history.

Dirt and dust can also be found on the floor. Dents occasionally appear on some tiles.

This is a dried muddy field during a drought. After losing all the water, large and small cracks appear everywhere. There are small stones scattering around the soil.

This texture is great for texturing a non-irrigated farmland.