These floor tiles are arranged in chevron. The wooden texture is similar to that of maple trees. This material is excellent for flooring or texturing sauna rooms.

The tile color, grout width, grout depth, edge wear etc. can be changed via the Substance Deisigner SBSAR file.

These wooden plank belong to beech tree type. There is a high contract between the grains and wood colors. It has been waxed, so it has a little glossiness.

The amount and ratio of the tiles can be set. Besides, the gap width, wood color, grain color can all be changed through the SBSAR file.

Furthermore, you can fine tune the edge wear and tile offset value.

The dark reddish ash wood tiles are arranged in herringbone format.

The edge wear and grout width can be tuned by the SBSAR file.

These are maple wood tiles in herringbone orientation. It is an excellent for flooring.

The level of color variation, grout width etc. can be changed by the Substance 3D Designer SBAR file.

These planks are of dark ash wood which is good for flooring and furniture.

Though it is a long single plank, it can be turned into wooden tiles when using the SBSAR file. The grout width, offset etc. can also be manipulated.

They are ash wood planks which are commonly used for flooring sitting rooms.

The Substance Designer file lets you change the tile amount and ratio, adjust the grout width and color, manage the number of tree knots etc.

It is the surface texture of a typical gun handle grip having diamond shaped bumps to increase fiction.

The color of the gun can be changed through the Adobe Substance SBSAR file.

This highly worn reddish-brown leather material has a lot of scratches. There is scale-like texture on its surface.

The color and the color variations can be adjusted by the SBSAR file.

It is a playground floor covered by rubber mulch which is a mixture of red and black.

The SBSAR file gives you the flexibility to change the both colors and their ratio.

It is a kind of rubber flooring which can absorb impact, so it is used as a playground surface.

You can change the color of the material by using the Substance SBSAR file.

They are playground mats providing a protective flooring for children. Green and red are common colors used. This mulch are durable as outdoor tiles.

The SBSAR file lets you change the colors of the checkers and define the offset random.

These protective tiles can easily be found in playgrounds. They are used as safety surfacing. Black and red checker pattern is one of the popular combinations.

The Substance 3D designer file gives you the freedom to change the colors of the tiles and set the offset random of the tiles.

It is a rubber texture which is suitable as a non-slip material for handles of bikes, bicycles, scooters etc.

The color, edge wear level, bevel, deformation level and amount of dust can all be managed by the Substance 3D SBSAR file.

It is a scuffed plastic having a lot of rough marks on its surface. It is an excellent material for 3D models of old toys or retro plastic items.

The color of plastic and scuffed marks can be changed. The length, width and amount of the scratched marks can further be tuned by the Substance 3D Designer SBSAR file.

It is Styrofoam or polystyrene which is largely used as food containers for vegetables and fishes.

Dirt can easily be trapped into the tiny gaps between polystyrene particles, especially the containers are pulled on wet floors in markets.

The SBSAR file allows you to change the colors of the Styrofoam and dirt. The dirt level can also be tweaked.

This material is a polystyrene which is as known as Styrofoam in the US. It is an excellent insulation, so it is commonly used as a takeaway food containers.

If you want to fine tune the color, e.g. making it more yellowish or greyish, the SBSAR file may help.

This egg crate shaped foam is acoustic panels which is commonly installed in studio rooms.

The SBSAR gives you the freedom to set the orientation of panels, the amount of hemispheres, colors of the tiles etc.

These purple acoustic panels are soundproof foam having a shape of eggcrates.

The color can be changed. It can also be a mixture of 2 colors in a checker pattern as long as the Substance 3D Designer SBSAR is used.

These are acoustic foam used for soundproofing in studios. This kind of tiles has a lot of forms such as wedges, pyramids. A pyramid is one of the effective shape to absorb sound.

These black tiles can be turned into different colors or even a checker pattern by the Substance 3D Designer SBSAR file. The randomness of the position offset can also be set.

They are acoustic panels arranged in a checker pattern with 2 colors, black and red. Wedges can be found on each foam.

In order to set the number of wedges per tiles, users can use the Substance 3D Designer SBSAR file. Besides, the colors of the checker pattern can be adjusted.