It is an iron or steel metal having a prominent radial polished or brushed marks.

To acquire the effect of the radial brushed lines, please remember to apply both the anisotropy angle and anisotropy level maps.

The color, number of brushed spins, position of the circular spins, roughness variation etc. can be managed by the Substance SBSAR file.

It is a wireframe generator which can generate seamless wireframe, framed wireframe and so on.

The SBSAR file allows users to change the wire color, wire amount, wire thickness etc.

They are screws of different types. Some are countersunk, some have round caps and some have hexagonal holes.

The SBSAR allows users to change the amount of rust.

It is a shiny metal plate with polished lines. The diagonal brushed marks give the metallic surface a fashionable character, so it fits for texturing doors of elevators or other stylish artworks.

Using the SBSAR file, users can change the type of metals, and control the amount of strokes and dirt.

It is a galvanized metal being hammered and having a lot of rust.

The SBSAR allows users to change the hammer size, hammer effect intensity, amount of rust, scratches and dents etc.

A pair of iron wires are twisted to create coins and barbs. Brownish rust also forms along the wire.

Using the SBSAR file, users can tweak the tightness, number of coils, coil size, metal color, rust color, rust level, dirt level etc.

This barbed wire texture can be used together with Chain-link Iron Wire Fence Texture Woven in Diamond Shape
(Metal 0017) material.

They are punch through holes. The normal map can be used for creating punch through effect of papers, card boards or creating bullet shots.

These holes go inwards. This texture can also be used together with "Imperfection and Decal of Bullet Holes (Imperfection 0003)" which goes outwards.

They are bullets holes. The most useful maps of this texture are normal and mask. With the normal map, you can shoot holes in any materials especially metal. The mask tells you the position of the holes.

It is good to be treated as an imperfection or decal.

These holes go outwards. This texture can also be used together with "Decal of Punch Through Holes (Imperfection 0004)" which goes inwards.

It is a galvanized roll up door. The door can be rolled up into a cylinder and kept at the top of the shop.

Therefore, hinges exist between blades. Galvanized metal sheet has its particular pattern which can be found on the texture.

This is an oxidized iron sheet on which there is numerous scratches and dents. Most of the scratches and pits corroded and are covered with rust. Besides, some of the rust is dripping down due to the rain wash.

This shiny silver texture is a typical material for making padded coats and jackets. The material is sewn into diamonds producing padded patterns. Each diamond pocket has some cotton inside. This ensure inner cotton is always evenly distributed.

There are also wrinkles, stitches, dirt and folds on the surface.

They are drop ceiling tiles in most of the offices. This mineral fiber ceiling is the most widely adopted type.It has a lot of pores on the surface.

Ceiling tiles are usually mounted on a suspended aluminum frame. Since aluminum is a soft metal. The frame can easily be deformed.

Edge wear also happens on the metal frame.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

It is the most commonly used bubble wrap for packaging goods and products. Each bubble has different degrees of damage and wrinkles.

Opacity map is also provided with the texture because bubble wrap is semi-transparent.

In order to achieve good rendering result, glass shader should also be used.

Metal map can also imitate the excellent result by mixing the opacity and metallic maps for some shaders, so a metallic map is also available, but optional.

This iron sheet has a lot of holes as it is a punched or perforated metal sheet. Its surface tells us it is oxidized and a lot of reddish and yellowish rust has formed on the surface.

It is a desired material for machine cases.

It is a oxidized brushed aluminum plate with dirt. The oxidation reduces the reflectiveness of the metal, so the surface has uneven glossiness.

Besides oxidation, dirt also affects the colors and reflectivity of aluminum.

This highly oxidized metal plate is full of round cap nails, but well aligned. It is usually used as covers for containers.

Dirt has accumulated around round caps as those are good places to hide debris.

Oxidation has different degrees too. It can be proved by different reflectivity.

Of course, scratches cannot be omitted for oxidized iron metals.

It is a galvanized metal sheet with different sizes of scratches and pitting.

The crystallized pattern defines the signature of galvanized iron.

Galvanized metal is commonly used for covering wooden structure. Usually, construction workers simply nail them on wooden parts.

It is also used to make water tanks.

It is a cobalt or nickel like metal plate. The surface has been hammered, so it is very uneven and bumpy. The surface is also oxidized affecting the reflection.

This texture composes of multiple corrugated sheets of metal stacking on each other. The wavy shape of corrugated metals makes it stands out among other metals.

If you look at it carefully, you will find there are rusty cuts and scratches.