This texture is between snow and ice. When someone steps on snow, the snow might melt. The snow gets the glossy and shiny ice characteristic after it has been re-frozen.

Undoubtedly, this is a dry out land leaving numberless cracks on the surface.

It also looks like a soil texture.

Walls of some ancient houses were made of mud. After being dry, the texture of those walls look similar to this texture too.

It is an asphalt texture with cracks all over the surface. Definitely, it is a marvelous material for ground or flooring. It is also great for texturing a wall.

It is a flooded and muddy texture. It looks like surfaces of marshes.

Undoubtedly, it is an excellent texture for swampland, marshland and bogs.

Comparing to Ground 0001, it is more moisture-laden and its surface is smoother.

This lumpy texture has an irregular surface which has numerous pebbles.

The damp and marshy texture grants it the appearance of a swampy ground.

This fabric demonstrates the classic Scottish checkered patterns in the traditional red and white colors.

Similar patterns can be found on table cloths of some restaurants. The patterns are printed on many picnic blankets too.

The pattern of this fabric makes it look like a carpet. Certainly, it can also be used as a scarf texture.

The mixture of yellow and red patterns can be found on many traditional ornaments in Tibet, China.

A fabric with green and brown camouflage patterns.

It is suitable for war game or army uniforms.

It is a very rough concrete with a lot of tiny pits or pores.

White spots can be found on the surface.

Besides, big cracks are everywhere.

It is an uneven grey plaster wall with prominent trowel marks.

Dirt can be found on the surface.

It is a green plaster wall. It has a little glossiness. Definitely, it is not a new wall, but a worn out wall.

Some of the shiny green paint was peeled off exposing the base wall material.

After applying this texture to a wall, it looks like a thick plaster wall. The grey color gives it a raw appearance.

It is a worn out material with some cracks running across the whole texture. There are a lot of trowel marks leaving on the texture.

This concrete has a bit shiny texture. A few big cracks are running on the concrete. Greenish mold also grows on the surface.

It looks natural when being used as concrete wall or floor texture of damaged buildings and roads.

It is a very common grey asphalt.

This texture fits for highways, car roads, pedestrian roads, pavements etc.

It also right for concrete walls and pillars.

They are classic tiled grey bricks which can be found in many streets and parks.

Bricks can be arranged in a lot of patterns. Herringbone pattern is one of the most common patterns, which can be found on many pavements.

This texture is quite similar to Bricks 0003, except it is grey and its edges are worn out.

It is suitable for pavements and sidewalk, especially outdoor ones.

They are classic tiled red bricks which can be found in many streets and parks.

Bricks can be arranged in a lot of patterns. Herringbone pattern is one of the most common patterns, which can be found on many pavements.

It is suitable for pavements and sidewalks, especially outdoor ones.

Those red bricks have very irregular, rough and bumpy surface.

They are outdoor bricks, so they have a lot of worn out areas.

It is more suitable as a wall material than a floor texture, otherwise, the floor will be too rutty.

They are red bricks with little glossiness.

Though it has a smooth surface, there are quite a lot of pits or pores on the surface.

This texture is suitable for indoor brick walls, walls of corridors etc.